Hi there,
Fuel pump seized at the weekend, so rather than replace just the pump thought I would put braided hoses in as well. The current pump is a Bosch 0580464069 which has a threaded outlet and a banjo style inlet. I obviously want threaded inlet and outlet so I can have the quality connectors, what can you recommend. Also looking for a new regulator too, recommendations?
Engine is GSXR600 - K8
Regards
Steve
F2 Fuel Pump
-
STEVIEBOY491
- Scything Through The Field
- Posts: 161
- Joined: Sat Jul 17, 2010 6:43 pm
- D/P/T/M/S: Driver/Passenger
- Full Name: Steve Jackson
- Location: Leicestershire
-
Simon Smith
- Throttle on the Stop
- Posts: 592
- Joined: Tue Jan 15, 2008 9:16 pm
- D/P/T/M/S: Driver
- Full Name: Simon Smith
- Twitter: @simonsmithno92
- Location: Solihull, West Midlands
- Contact:
Re: F2 Fuel Pump
Hi Steve,
This is the regulator I use:
http://www.demon-tweeks.co.uk/performan ... -regulator
and this is the pump Wal Saunders has them:
http://www.racereadyproducts.com/fuel-p ... fuel-pump/
Cheers,
Simon
This is the regulator I use:
http://www.demon-tweeks.co.uk/performan ... -regulator
and this is the pump Wal Saunders has them:
http://www.racereadyproducts.com/fuel-p ... fuel-pump/
Cheers,
Simon
No 92
F2 Sidecar Race Team
http://WWW.FPARACING.CO.UK
http://WWW.CALEBSMITHRACING.CO.UK
F2 Sidecar Race Team
http://WWW.FPARACING.CO.UK
http://WWW.CALEBSMITHRACING.CO.UK
-
STEVIEBOY491
- Scything Through The Field
- Posts: 161
- Joined: Sat Jul 17, 2010 6:43 pm
- D/P/T/M/S: Driver/Passenger
- Full Name: Steve Jackson
- Location: Leicestershire
Re: F2 Fuel Pump
Cheers Simon,
Really appreciated.
Really appreciated.
-
ChrisWells
- Scything Through The Field
- Posts: 197
- Joined: Wed Sep 08, 2010 3:55 pm
- D/P/T/M/S: D/P (Retired)
- Full Name: Chris Wells
- Location: Ottawa, Ontario, Canada
Re: F2 Fuel Pump
I run a similar regulator but it has AN fittings (and I'm pretty sure I got it from Wal).
Just a heads up on the pump (which I also source from Wal): the inlet side is still a barb fitting.
Chris
Just a heads up on the pump (which I also source from Wal): the inlet side is still a barb fitting.
Chris
Chris Wells
Ottawa, Canada
2015 IOM TT Compeitor
2014 Pikes Peak Competitor
2013 SRA East F2 Championship (Driver)
2013 SRA East Overall 2nd Place (Driver)
2012 & 2011 SRA East F1 Championship (Driver)
2010 MRE F2 with Yamaha R6 (SOLD)
2007 CSR F1 with 05 Honda CBR1000RR (SOLD)
1990 Honda VFR750F
2001 Suzuki RM250
Ottawa, Canada
2015 IOM TT Compeitor
2014 Pikes Peak Competitor
2013 SRA East F2 Championship (Driver)
2013 SRA East Overall 2nd Place (Driver)
2012 & 2011 SRA East F1 Championship (Driver)
2010 MRE F2 with Yamaha R6 (SOLD)
2007 CSR F1 with 05 Honda CBR1000RR (SOLD)
1990 Honda VFR750F
2001 Suzuki RM250