I have fdb342 cp911 disc pads in Bill Curries old f2 windle, and now because i am only using the outfit at present for sprints, and demo runs i need a different disc pad to inprove the brake efficiency.Any suggestions on what type of pad, and where to purchase them from.
PM me or ring 07713634180, or e-mail me at robkcars@aol.com.
Thanks .
Brake pads
-
Standinski
- Fired Up
- Posts: 41
- Joined: Tue Mar 02, 2010 11:19 pm
- D/P/T/M/S: P/T
- Full Name: Rob Konieczny
- Location: Tarporley, Cheshire
-
craig hauxwell
- One Lap Completed
- Posts: 82
- Joined: Thu May 22, 2008 12:00 am
- D/P/T/M/S: DRIVER
- Full Name: craig hauxwell
- Location: wirral
Re: Brake pads
pm sent rob.
-
Wal
- Setting the Fastest Lap
- Posts: 202
- Joined: Fri Jun 16, 2006 8:04 am
- D/P/T/M/S: Driver/Teaboy
- Full Name: Wally Saunders
- Location: Isle of Man
- Contact:
Re: Brake pads
Your pm to Rob better have our details on it Craig . . or you are TOAST !!!! ![[uglyhammer.gif]](./images/smilies/uglyhammer.gif "[uglyhammer.gif]")
I don’t regret the things I did wrong, I do regret the things I did right. . .for the wrong people !
-
Wal
- Setting the Fastest Lap
- Posts: 202
- Joined: Fri Jun 16, 2006 8:04 am
- D/P/T/M/S: Driver/Teaboy
- Full Name: Wally Saunders
- Location: Isle of Man
- Contact:
Re: Brake pads
Hi Rob
We have most of what you need in stock including complete new Windle discs as I was Windle's disc supplier until he retired.
Re Pads, the rotors are made of Ductile Iron so it is not recommended to run sintered pads as they will give good bite, but will destroy your discs in the process. This does depend however on how hot your discs will get. You will get away with a good quality sintered pad if you run them cold, but beware, most sintered pads are not good quality.
A good middle of the road pad would be Ferodo 342 Platinum compound, but there are other options.
The problem with race pads like the CP911 is that they do need to run hot to work properly.
If you need any more help, just give us a shout. Wal
We have most of what you need in stock including complete new Windle discs as I was Windle's disc supplier until he retired.
Re Pads, the rotors are made of Ductile Iron so it is not recommended to run sintered pads as they will give good bite, but will destroy your discs in the process. This does depend however on how hot your discs will get. You will get away with a good quality sintered pad if you run them cold, but beware, most sintered pads are not good quality.
A good middle of the road pad would be Ferodo 342 Platinum compound, but there are other options.
The problem with race pads like the CP911 is that they do need to run hot to work properly.
If you need any more help, just give us a shout. Wal
I don’t regret the things I did wrong, I do regret the things I did right. . .for the wrong people !