Yoshi EMPro Quickshifter pins

For Results,please see the timekeeper's office next door! To register, click the link in the top right corner.
Post Reply
User avatar
Simon Smith
Throttle on the Stop
Posts: 592
Joined: Tue Jan 15, 2008 9:16 pm
D/P/T/M/S: Driver
Full Name: Simon Smith
Twitter: @simonsmithno92
Location: Solihull, West Midlands
Contact:
Contact Simon Smith

Yoshi EMPro Quickshifter pins

Unread post by Simon Smith »

I've got a Yoshi EmPro on my GSXR600 K7. I'd like to fit a compatible quick shifter that doesn't result in the fault code light displaying.

I know the EmPro uses the side stand switch to activate the ignition kill. Can anybody tell me the plug pin numbers for the side stand switch? I think mine may have been cut off.
Top
User avatar
Eurocup
Setting the Fastest Lap
Posts: 260
Joined: Wed Jun 21, 2006 6:48 am
D/P/T/M/S: Driver, Ex-passenger
Full Name: Eckart Roesinger
Location: Trier/Germany
Contact:
Contact Eurocup

Re: Yoshi EMPro Quickshifter pins

Unread post by Eurocup »

hi
it is the green plug.
just plug in and it works....on mine it did.
bye Eckart
Top
User avatar
Simon Smith
Throttle on the Stop
Posts: 592
Joined: Tue Jan 15, 2008 9:16 pm
D/P/T/M/S: Driver
Full Name: Simon Smith
Twitter: @simonsmithno92
Location: Solihull, West Midlands
Contact:
Contact Simon Smith

Re: Yoshi EMPro Quickshifter pins

Unread post by Simon Smith »

I don't have a green plug. :cry:
Top
User avatar
uw.engineer
On the Starting Grid
Posts: 10
Joined: Mon Sep 01, 2008 8:47 am
D/P/T/M/S: Tech Support
Full Name: Alan Leslie
Location: Glenrothes

Re: Yoshi EMPro Quickshifter pins

Unread post by uw.engineer »

Hi,

If you have a Yoshi race loom, there should be a green plug (same as side stand plug) which is wired for the quickshifter.

Remember to set it up in the software.

On the ECU Yoshi for a 1000cc on a normal harness it is pin 51 or 52 (blue/black) (blue/white) one was for the quick shift the other was pit speed limiter
Nothing clever about electronics, it’s all about the smoke. You let the smoke get out and it stops working
Top
User avatar
uw.engineer
On the Starting Grid
Posts: 10
Joined: Mon Sep 01, 2008 8:47 am
D/P/T/M/S: Tech Support
Full Name: Alan Leslie
Location: Glenrothes

Re: Yoshi EMPro Quickshifter pins

Unread post by uw.engineer »

Hi,

Just found this, not 100% about where it came from.

It shows blue/green pin 15 on the black connector.
Attachments
2006 600 yoshi ecu.xls
(31.89 KiB) Downloaded 168 times
Nothing clever about electronics, it’s all about the smoke. You let the smoke get out and it stops working
Top
User avatar
Simon Smith
Throttle on the Stop
Posts: 592
Joined: Tue Jan 15, 2008 9:16 pm
D/P/T/M/S: Driver
Full Name: Simon Smith
Twitter: @simonsmithno92
Location: Solihull, West Midlands
Contact:
Contact Simon Smith

Re: Yoshi EMPro Quickshifter pins

Unread post by Simon Smith »

That's great. Thank you. I do have a Yoshi but the previous owner has removed some of the plugs and wires. That's why I needed to know the plug numbers.
Top
Post Reply

Return to “The Sidecar Paddock”