Outside diameter of ones fitted is too large and is catching on chassis mounting, m12 thread and 10mm eye on joint.
- rose joint.jpg (39.01 KiB) Viewed 1643 times
ROSE JOINT SUPPLIER FOR LCR?
-
bndesigns
- One Lap Completed
- Posts: 87
- Joined: Fri Jun 16, 2006 9:08 pm
- D/P/T/M/S: Team Manager
- Full Name: Bryan Nicol
- Location: Scotland
ROSE JOINT SUPPLIER FOR LCR?
looking for supplier for rose joint to fit in cantilever section on the front of an 85 LCR, any suggestions?
Outside diameter of ones fitted is too large and is catching on chassis mounting, m12 thread and 10mm eye on joint.
Outside diameter of ones fitted is too large and is catching on chassis mounting, m12 thread and 10mm eye on joint.
-
Blandy
- In Collection Area
- Posts: 8
- Joined: Wed Jan 15, 2014 11:30 pm
- D/P/T/M/S: Driver
- Full Name: Lee Cutts-Bland
- Location: Chesterfield
Re: ROSE JOINT SUPPLIER FOR LCR?
Give Mcgill motorsport a call, they are good to deal with .
-
Eurocup
- Setting the Fastest Lap
- Posts: 260
- Joined: Wed Jun 21, 2006 6:48 am
- D/P/T/M/S: Driver, Ex-passenger
- Full Name: Eckart Roesinger
- Location: Trier/Germany
- Contact:
Re: ROSE JOINT SUPPLIER FOR LCR?
the rose joints are from "Schäublin" Swiss. Try to get the original ones. May be dealer in UK.
bye eckart
bye eckart
-
mervnoble
- Setting the Fastest Lap
- Posts: 252
- Joined: Sun Oct 26, 2008 12:46 pm
- D/P/T/M/S: Driver
- Full Name: Merv Noble
- Location: Newark, Notts, England
Re: ROSE JOINT SUPPLIER FOR LCR?
bndesigns wrote:looking for supplier for rose joint to fit in cantilever section on the front of an 85 LCR, any suggestions?
Outside diameter of ones fitted is too large and is catching on chassis mounting, m12 thread and 10mm eye on joint.
Have you tried Steve Abbott?
Anyhow since 1957
-
bndesigns
- One Lap Completed
- Posts: 87
- Joined: Fri Jun 16, 2006 9:08 pm
- D/P/T/M/S: Team Manager
- Full Name: Bryan Nicol
- Location: Scotland
Re: ROSE JOINT SUPPLIER FOR LCR?
sorted now