Suzuki K9 what do I need to make it go?

For Results,please see the timekeeper's office next door! To register, click the link in the top right corner.
Post Reply
Metalface.
Scything Through The Field
Posts: 148
Joined: Sun Oct 07, 2012 10:16 am
D/P/T/M/S: Super Hero.
Full Name: Mark Berry
Location: Bolton.
Contact:
Contact Metalface.

Suzuki K9 what do I need to make it go?

Unread post by Metalface. »

I'm swopping from Thundercat to Suzuki and have got myself a K9 engine and throttle bodies. I've looked on Ebay and most of the looms and ECU's come with the lockset, I presume its because of the imobiliser, is their a way round this as I don't want to buy an ignition and fuel tank cap if I can help it.

Thanks. :)
Beauty is in the eye of the beer holder.
Top
User avatar
tufty113
Setting the Fastest Lap
Posts: 273
Joined: Sun Jul 22, 2007 8:07 pm
D/P/T/M/S: driver(well try to)
Full Name: matt dix
Location: near the french!!!!!

Re: Suzuki K9 what do I need to make it go?

Unread post by tufty113 »

Fuel pump n pressure reg. clocks. Airbox n bellmouths. Exhaust system. Sumps. That's a good start. Ta Dixie.
http://www.madservices.co.uk

Image

Motorcycle Servicing & Engineering in Kent & Sussex
Top
User avatar
Whites
Scything Through The Field
Posts: 150
Joined: Tue Oct 02, 2012 12:21 pm
D/P/T/M/S: Driver
Full Name: David Schofield
Location: Rossendale, Lancashire

Re: Suzuki K9 what do I need to make it go?

Unread post by Whites »

Get in touch with Tony Baker. He will be able to provide you with a cut down sump, new oil pick up and some sump baffles.
Schofield Racing
Currently driving a Windle Suzuki GSX-R600 K7.
Visit our facebook page.
Visit our Sponsor: http://witcheliquid.co.uk
Top
User avatar
steve-e
Site Admin
Posts: 8953
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:
Contact steve-e

Re: Suzuki K9 what do I need to make it go?

Unread post by steve-e »

How do you get round the original point of the immobiliser? Probably best if it's by PM lol..
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
Top
User avatar
lovingit
Setting the Fastest Lap
Posts: 251
Joined: Wed Jun 14, 2006 9:09 pm
D/P/T/M/S: driver
Full Name: dean banks
Twitter: @f2sidecar
Location: staffs

Re: Suzuki K9 what do I need to make it go?

Unread post by lovingit »

There are certain ecu numbers that will run think they end in 00 instead of 01 on the number but the others wont . These can be wired to work. Speak to mal curnin he may have an ecu that will be able to be made to work . Then if you want it wiring speak to pete alton at otc dyno as it needs some resistors etc to make it work .
Dream as if youll live forever and live as if youll die tomorrow.... Happy days
Top
User avatar
steve-e
Site Admin
Posts: 8953
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:
Contact steve-e

Re: Suzuki K9 what do I need to make it go?

Unread post by steve-e »

Pete was going to be my suggestion this morning as well.
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
Top
Metalface.
Scything Through The Field
Posts: 148
Joined: Sun Oct 07, 2012 10:16 am
D/P/T/M/S: Super Hero.
Full Name: Mark Berry
Location: Bolton.
Contact:
Contact Metalface.

Re: Suzuki K9 what do I need to make it go?

Unread post by Metalface. »

The wiring is the bit I need to know about, I've got most of the rest sorted and I've spoken to Tony Baker already.

I'll ring Pete Alton in the morning, thanks. :notworthy:
Beauty is in the eye of the beer holder.
Top
Metalface.
Scything Through The Field
Posts: 148
Joined: Sun Oct 07, 2012 10:16 am
D/P/T/M/S: Super Hero.
Full Name: Mark Berry
Location: Bolton.
Contact:
Contact Metalface.

Re: Suzuki K9 what do I need to make it go?

Unread post by Metalface. »

Spoke to Pete Alton and Mal Curnin today, I think I'm sorted now, thanks. :D
Beauty is in the eye of the beer holder.
Top
User avatar
ChrisWells
Scything Through The Field
Posts: 197
Joined: Wed Sep 08, 2010 3:55 pm
D/P/T/M/S: D/P (Retired)
Full Name: Chris Wells
Location: Ottawa, Ontario, Canada

Re: Suzuki K9 what do I need to make it go?

Unread post by ChrisWells »

Gee my first instinct was to reply: petrol? :lol:
Good luck with your motor swap.
Chris Wells
Ottawa, Canada
2015 IOM TT Compeitor
2014 Pikes Peak Competitor
2013 SRA East F2 Championship (Driver)
2013 SRA East Overall 2nd Place (Driver)
2012 & 2011 SRA East F1 Championship (Driver)

2010 MRE F2 with Yamaha R6 (SOLD)
2007 CSR F1 with 05 Honda CBR1000RR (SOLD)
1990 Honda VFR750F
2001 Suzuki RM250
Top
Metalface.
Scything Through The Field
Posts: 148
Joined: Sun Oct 07, 2012 10:16 am
D/P/T/M/S: Super Hero.
Full Name: Mark Berry
Location: Bolton.
Contact:
Contact Metalface.

Re: Suzuki K9 what do I need to make it go?

Unread post by Metalface. »

Thanks for your input. :lol:
Beauty is in the eye of the beer holder.
Top
User avatar
oldbelly
Opposite Lock Through the Chicanes
Posts: 842
Joined: Sat Oct 27, 2007 5:33 pm
Full Name: Geoff Bell
Location: Bedlington

Re: Suzuki K9 what do I need to make it go?

Unread post by oldbelly »

Make sure the weight bias is a little more to the rear. Colin got it wrong but being Colin would never change things. He did with the very last one for Howard Langham. I was behind you at Tonfanau when you lost it on the warm up lap. I did the same thing in practice 93 at Hillberry. The alternative is to get your passenger to overwork the back. Im sure Joe will sort it , good luck.
Top
Metalface.
Scything Through The Field
Posts: 148
Joined: Sun Oct 07, 2012 10:16 am
D/P/T/M/S: Super Hero.
Full Name: Mark Berry
Location: Bolton.
Contact:
Contact Metalface.

Re: Suzuki K9 what do I need to make it go?

Unread post by Metalface. »

Thanks.

I didn't get my 12 year old sidecar tyre warm enough. [brick.gif] Joe told me off for that. :lol:
Beauty is in the eye of the beer holder.
Top
User avatar
oldbelly
Opposite Lock Through the Chicanes
Posts: 842
Joined: Sat Oct 27, 2007 5:33 pm
Full Name: Geoff Bell
Location: Bedlington

Re: Suzuki K9 what do I need to make it go?

Unread post by oldbelly »

Sidecar tyre on that occassion then but if you push your bike hard enough in the future with the set up as it is youll find out what I mean. ;)
Top
User avatar
steve-e
Site Admin
Posts: 8953
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:
Contact steve-e

Re: Suzuki K9 what do I need to make it go?

Unread post by steve-e »

Can I just add how cool it is in sidecars that Geoff Bell is giving help and advice to a new racer. This sport is an awesome thing :D
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
Top
User avatar
powerhouse
Setting the Fastest Lap
Posts: 259
Joined: Sun Aug 31, 2008 10:02 pm
D/P/T/M/S: driver
Full Name: brian ilaria
Location: derby

Re: Suzuki K9 what do I need to make it go?

Unread post by powerhouse »

I have all specs regarding immob,pair,exhaust,and steering damper bypass by pm only
Done all your doing last season.
We broke something, I think it was traction….........


www.powerhouseturbo.com
http://www.goodwintanks.co.uk
Top
Post Reply

Return to “The Sidecar Paddock”