1into2 throttle barrel
-
- Fired Up
- Posts: 41
- Joined: Mon Feb 09, 2009 11:39 pm
- Full Name: Andrew Bailey
1into2 throttle barrel
does anybody know where i can get the old 1into2 throttle barrell cable setup for an old triumph sidecar we,re putting together cheers andy.
Re: 1into2 throttle barrel
I use the plastic barrel from the triumph triple choke
-
- Scything Through The Field
- Posts: 138
- Joined: Fri Aug 06, 2010 5:49 pm
- D/P/T/M/S: passenger/driver
- Full Name: Keith Jones
- Location: West Yorkshire
Re: 1into2 throttle barrel
They are available from Amal, along with the cables but they are not cheap, it worked out at about £65 for a ketttle throttle cable, I bought 2 genuine suzuki cables for that price.
I thought early Bonnevilles had that arrangement but I'm not sure that you could change the cables, I seem to think they were crimped, I have a mate who is into early Triumphs, if I can contact him, he is buying bikes from USA, so I don't know if he is at home, I will ask him and post reply for you.
I thought early Bonnevilles had that arrangement but I'm not sure that you could change the cables, I seem to think they were crimped, I have a mate who is into early Triumphs, if I can contact him, he is buying bikes from USA, so I don't know if he is at home, I will ask him and post reply for you.
- steve wheatley
- On the Starting Grid
- Posts: 19
- Joined: Mon Mar 31, 2008 7:14 pm
- D/P/T/M/S: driver
- Location: Toton Notts
- Contact:
Re: 1into2 throttle barrel
Hi Andy we use a twin pull throttle and cables you can route them better than the single setup cheers
-
- In Collection Area
- Posts: 2
- Joined: Tue Dec 28, 2010 1:25 pm
- Full Name: Chris Tyler
Re: 1into2 throttle barrel
Hi
I have a few.
I run twin throttles now.
Weld my project sidecar, chassis togeather for me & you can have one!!!!
Send me your details
all the best Chris
I have a few.
I run twin throttles now.
Weld my project sidecar, chassis togeather for me & you can have one!!!!
Send me your details
all the best Chris
- Triplebrew
- Sniffing a Victory
- Posts: 1030
- Joined: Mon Jun 26, 2006 3:49 pm
- D/P/T/M/S: Ballast
- Full Name: Ian Tapsell
- Location: Kent
- Contact:
Re: 1into2 throttle barrel
Now I am scared ChrisChris Tyler wrote:Hi
I have a few.
I run twin throttles now.
Weld my project sidecar, chassis togeather for me & you can have one!!!!
Send me your details
all the best Chris
2011 MR Equipe Trident
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
-
- Scything Through The Field
- Posts: 138
- Joined: Fri Aug 06, 2010 5:49 pm
- D/P/T/M/S: passenger/driver
- Full Name: Keith Jones
- Location: West Yorkshire
Re: 1into2 throttle barrel
Andy,
in case the pm didn't get through, I've got a cable for you, pm your details to me and I will post it off to you.
in case the pm didn't get through, I've got a cable for you, pm your details to me and I will post it off to you.