Page 1 of 1

Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Posted: Mon Jun 12, 2023 3:50 pm
by steve-e
Classic 13“ BMW, chassis made by Tony Baker

Race Prepped & ready To Go

3 recent Shocks Factory shock absorbers

New brake disks, calipers, Pads and master cylinders joints, Venhill Cables, 3 X New Tyres (Only completed 12 laps at Cadwell) at the beginning of the season

1070cc engine, Jim Cray heads, special pistons, Siebenrock rods, resized camshaft, lightened crankshaft and balanced with the flywheel, racing clutch, NovaRacing gearbox reviewed 6 races ago, Ignitec electronic ignition system, Hard Wired Rev Counter, Racetech Oil Pressure & temperature Gauge Dell’Orto 40 carbs, dry sump completely rebuilt at the beginning of the season (new oil pump, new plate, Speedflow hose and fittings), 3 rear axles.
Recent Dyno Sheet Available.
Immaculate Throughout & Maintained without looking at the expense – New paintwork

Finishing the 2021 French Classic Championship at the 3rd place (winner of the last round at Val de Vienne).

£21,000 or Very Nearest Offer

Contact Rob Sirrell
robsirrell@yahoo.co.uk
+447885162400

f36b8060-89f1-45bf-84d3-6966a3aab707.jpg
f36b8060-89f1-45bf-84d3-6966a3aab707.jpg (143.91 KiB) Viewed 8483 times
36206a36-6329-46a6-9653-fe5d4287e466.jpg
36206a36-6329-46a6-9653-fe5d4287e466.jpg (153.33 KiB) Viewed 8483 times
4dcada23-f3ca-40ea-9e08-3a0cbf42dec6.jpg
4dcada23-f3ca-40ea-9e08-3a0cbf42dec6.jpg (147.54 KiB) Viewed 8483 times
198539f2-e174-4cef-8635-075acc722537.jpg
198539f2-e174-4cef-8635-075acc722537.jpg (81.9 KiB) Viewed 8483 times

Re: Classic 13“ BMW, chassis made by Tony Baker

Posted: Mon Sep 25, 2023 1:29 pm
by robsirrell
Now Reduced to £21'000

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Posted: Thu Sep 28, 2023 6:36 pm
by #147racing
Be interested in seeing the dyno charts

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Posted: Mon Oct 02, 2023 4:14 pm
by robsirrell
Hi Got dyno sheets available for potential buyer

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Posted: Tue Oct 10, 2023 10:00 am
by #147racing
Could you send them to djlissaman@gmail.com

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Posted: Tue Apr 09, 2024 6:59 am
by Wjpierce
Still Available? Sent an email. Bill Pierce