Bruce Ford Dunn RD350 -PRICE DROP-

Classics, Post Classics, F350's, Vintage, Road Outfits
Weldherup
Fired Up
Posts: 25
Joined: Wed May 26, 2021 8:45 am
D/P/T/M/S: D
Full Name: weld her up

Bruce Ford Dunn RD350 -PRICE DROP-

Unread post by Weldherup »

I’ve a wee Bruce Ford Dunn chassis project with an RD350 in it. It’s 90% finished. The engine is freshly rebuilt and not even run in. It had bearings rods pistons and it’s got an electronic ignition. It’s got nice expansion boxes. It’s got new master cylinders, fuel pump. The shocks on the front are tired. Rear shock is fine. It’s running AP twin pots all round. It needs some work to get it finished but it’s all here.

£3500
Last edited by Weldherup on Wed Apr 13, 2022 5:25 pm, edited 2 times in total.
User avatar
steve-e
Site Admin
Posts: 8808
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:

Re: Bruce Ford Dunn RD350

Unread post by steve-e »

When you have photos send them to steve@steveenglish.com and I'll add them here.
Til there are photos in my experience you won't get much response.
If you have an email address or phone numner you will get a better response as well.

I'm quite sure that with photos and some contact details you will get quite some response as the Fsra Pre injection and 350 class is on a roll at the moment.
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
Weldherup
Fired Up
Posts: 25
Joined: Wed May 26, 2021 8:45 am
D/P/T/M/S: D
Full Name: weld her up

Re: Bruce Ford Dunn RD350

Unread post by Weldherup »

Got her pulled out. She’s not 100% finished but will be soon enough. It’s my mates bike. He’s moved onto another project and so this one may be available for sale. It needs a fairing and new shocks on the front and the rear serviced. It needs tyres and only has one set of wheels. There are no spares. She has a few war wounds here and there but it’s a nice bike over all. It’s a really nice well thought out little chassis. It’s very unique design. I’m not sure if the rd350 ypvs will be enough to be competitive but it maybe depends on your ability to tune it. It’s the same engine as a banshee and some of the lads that raced those had them motoring. The chassis is an 87 I think and the motor is a 86. There seems to have been some modifications in 2013 by CG I think. The chassis came from Steve Abbot before me and the motor came from a bike I bought a few years back as a donor.
Attachments
E7C3D624-EB1A-4D80-9E0A-21307882AB6E.jpeg
E7C3D624-EB1A-4D80-9E0A-21307882AB6E.jpeg (2.44 MiB) Viewed 11499 times
C6FFB137-727B-48F2-B88F-F17B09AEE3D9.jpeg
C6FFB137-727B-48F2-B88F-F17B09AEE3D9.jpeg (2.58 MiB) Viewed 11499 times
5618B107-EDAC-4822-A14B-BBA078CBB70E.jpeg
5618B107-EDAC-4822-A14B-BBA078CBB70E.jpeg (2.15 MiB) Viewed 11499 times
27765DD4-D752-49A7-B34F-2E4F8E3DFB22.jpeg
27765DD4-D752-49A7-B34F-2E4F8E3DFB22.jpeg (2.29 MiB) Viewed 11499 times
66C69DF8-74D1-45A5-9EAE-C5380E312EF7.jpeg
66C69DF8-74D1-45A5-9EAE-C5380E312EF7.jpeg (2.68 MiB) Viewed 11499 times
F9C044B0-68F3-43EB-A4B7-B3B54CED5751.jpeg
F9C044B0-68F3-43EB-A4B7-B3B54CED5751.jpeg (2.64 MiB) Viewed 11499 times
E4780A1E-EFDA-422D-9EFA-5D841A6E279D.jpeg
E4780A1E-EFDA-422D-9EFA-5D841A6E279D.jpeg (2.53 MiB) Viewed 11499 times
AF85AAC9-055A-4004-A3B3-A47882B7C724.jpeg
AF85AAC9-055A-4004-A3B3-A47882B7C724.jpeg (2.15 MiB) Viewed 11499 times
2CA9E961-122F-4D16-8132-4ED8A60B5358.jpeg
2CA9E961-122F-4D16-8132-4ED8A60B5358.jpeg (2.02 MiB) Viewed 11499 times
AF874C82-5296-4AFA-A48B-4D971C92DB6A.jpeg
AF874C82-5296-4AFA-A48B-4D971C92DB6A.jpeg (2.64 MiB) Viewed 11499 times
Weldherup
Fired Up
Posts: 25
Joined: Wed May 26, 2021 8:45 am
D/P/T/M/S: D
Full Name: weld her up

Re: Bruce Ford Dunn RD350

Unread post by Weldherup »

steve-e wrote: Wed May 26, 2021 11:59 am When you have photos send them to steve@steveenglish.com and I'll add them here.
Til there are photos in my experience you won't get much response.
If you have an email address or phone numner you will get a better response as well.

I'm quite sure that with photos and some contact details you will get quite some response as the Fsra Pre injection and 350 class is on a roll at the moment.

Thanks Steve
joeheys123
Scything Through The Field
Posts: 116
Joined: Wed Jan 27, 2010 12:51 pm
Full Name: joseph heys

Re: Bruce Ford Dunn RD350

Unread post by joeheys123 »

how much i love350 ring joe heys 01204520726 cheers
bruce ford-dunn
In Collection Area
Posts: 1
Joined: Wed Jun 09, 2021 8:21 pm
D/P/T/M/S: driver
Full Name: bruce ford-dunn

Re: Bruce Ford Dunn RD350

Unread post by bruce ford-dunn »

Hello Kyle.



as far as i remember i built that bike in 1981.If you have still got it could you email me please on bgfdunn@gmail.com.
regards bruce
User avatar
mervnoble
Setting the Fastest Lap
Posts: 252
Joined: Sun Oct 26, 2008 12:46 pm
D/P/T/M/S: Driver
Full Name: Merv Noble
Location: Newark, Notts, England

Re: Bruce Ford Dunn RD350

Unread post by mervnoble »

bruce ford-dunn wrote: Thu Jun 10, 2021 12:40 pm Hello Kyle.



as far as i remember i built that bike in 1981.If you have still got it could you email me please on bgfdunn@gmail.com.
regards bruce
Bruce did you build this for my brother Steve?
Anyhow since 1957
User avatar
mervnoble
Setting the Fastest Lap
Posts: 252
Joined: Sun Oct 26, 2008 12:46 pm
D/P/T/M/S: Driver
Full Name: Merv Noble
Location: Newark, Notts, England

Re: Bruce Ford Dunn RD350

Unread post by mervnoble »

Weldherup wrote: Thu May 27, 2021 12:08 am Got her pulled out. She’s not 100% finished but will be soon enough. It’s my mates bike. He’s moved onto another project and so this one may be available for sale. It needs a fairing and new shocks on the front and the rear serviced. It needs tyres and only has one set of wheels. There are no spares. She has a few war wounds here and there but it’s a nice bike over all. It’s a really nice well thought out little chassis. It’s very unique design. I’m not sure if the rd350 ypvs will be enough to be competitive but it maybe depends on your ability to tune it. It’s the same engine as a banshee and some of the lads that raced those had them motoring. The chassis is an 87 I think and the motor is a 86. There seems to have been some modifications in 2013 by CG I think. The chassis came from Steve Abbot before me and the motor came from a bike I bought a few years back as a donor.
I think that was first owned by my brother Steve
Anyhow since 1957
User avatar
mervnoble
Setting the Fastest Lap
Posts: 252
Joined: Sun Oct 26, 2008 12:46 pm
D/P/T/M/S: Driver
Full Name: Merv Noble
Location: Newark, Notts, England

Re: Bruce Ford Dunn RD350

Unread post by mervnoble »

Weldherup wrote: Wed May 26, 2021 10:38 am I’ve a wee Bruce Ford Dunn chassis with an RD350 in it. The engine is freshly rebuilt and not even run in. It had bearings rods pistons and it’s got an electronic ignition. It’s got nice expansion boxes. It’s got new master cylinders, fuel pump. The shocks on the front are tired. Rear shock is fine. It’s running AP twin pots all round. It’s been started a few times and that’s all. Just gauging interest. The bodywork is shabby. It’s got an Ireson faring but it’s too heavy. No idea what it’s worth with this engine. I’ve no photos of it in its current trim. It’s at the back of the garage and so I won’t have any photos for a week at least. Any interest?
What price is it please?
Anyhow since 1957
rpmsi
On the Starting Grid
Posts: 16
Joined: Sun Apr 21, 2013 6:39 pm
D/P/T/M/S: driver
Full Name: Simon horton

Re: Bruce Ford Dunn RD350

Unread post by rpmsi »

Hi buddy is this still for sale if so cud u let me know rpmperformance128@gmail.com
vaporblast
In Collection Area
Posts: 4
Joined: Wed Sep 01, 2021 8:29 pm
D/P/T/M/S: driver
Full Name: John Randle

Re: Bruce Ford Dunn RD350

Unread post by vaporblast »

Is the old fairing still kicking around? See my post.
bona eric (boul)
In Collection Area
Posts: 2
Joined: Tue Oct 05, 2021 2:30 pm
D/P/T/M/S: D
Full Name: eric bona

Re: Bruce Ford Dunn RD350

Unread post by bona eric (boul) »

Bonjour le side est toujours a vendre ? voici mon mail pour communiquer boul.syde@gmail.com
Weldherup
Fired Up
Posts: 25
Joined: Wed May 26, 2021 8:45 am
D/P/T/M/S: D
Full Name: weld her up

Re: Bruce Ford Dunn RD350

Unread post by Weldherup »

Sorry for late reply, the bike is still here. I started making the gear change linkage but didn’t finished it. It owes over 6k in parts. It’s a wee bike I wanted to get finished and race but I’m struggling badly with my back so I will sell it as is.
Weldherup
Fired Up
Posts: 25
Joined: Wed May 26, 2021 8:45 am
D/P/T/M/S: D
Full Name: weld her up

Re: Bruce Ford Dunn RD350

Unread post by Weldherup »

image.jpg
image.jpg (2.34 MiB) Viewed 8732 times
bona eric (boul)
In Collection Area
Posts: 2
Joined: Tue Oct 05, 2021 2:30 pm
D/P/T/M/S: D
Full Name: eric bona

Re: Bruce Ford Dunn RD350

Unread post by bona eric (boul) »

OUI A QUEL PRIX COMME IL SE TROUVE ACTUELLEMENT
BONNE JOURNEE A VOUS
Post Reply