Page 1 of 2

Bruce Ford Dunn RD350 -PRICE DROP-

Posted: Wed May 26, 2021 10:38 am
by Weldherup
I’ve a wee Bruce Ford Dunn chassis project with an RD350 in it. It’s 90% finished. The engine is freshly rebuilt and not even run in. It had bearings rods pistons and it’s got an electronic ignition. It’s got nice expansion boxes. It’s got new master cylinders, fuel pump. The shocks on the front are tired. Rear shock is fine. It’s running AP twin pots all round. It needs some work to get it finished but it’s all here.

£3500

Re: Bruce Ford Dunn RD350

Posted: Wed May 26, 2021 11:59 am
by steve-e
When you have photos send them to steve@steveenglish.com and I'll add them here.
Til there are photos in my experience you won't get much response.
If you have an email address or phone numner you will get a better response as well.

I'm quite sure that with photos and some contact details you will get quite some response as the Fsra Pre injection and 350 class is on a roll at the moment.

Re: Bruce Ford Dunn RD350

Posted: Thu May 27, 2021 12:08 am
by Weldherup
Got her pulled out. She’s not 100% finished but will be soon enough. It’s my mates bike. He’s moved onto another project and so this one may be available for sale. It needs a fairing and new shocks on the front and the rear serviced. It needs tyres and only has one set of wheels. There are no spares. She has a few war wounds here and there but it’s a nice bike over all. It’s a really nice well thought out little chassis. It’s very unique design. I’m not sure if the rd350 ypvs will be enough to be competitive but it maybe depends on your ability to tune it. It’s the same engine as a banshee and some of the lads that raced those had them motoring. The chassis is an 87 I think and the motor is a 86. There seems to have been some modifications in 2013 by CG I think. The chassis came from Steve Abbot before me and the motor came from a bike I bought a few years back as a donor.

Re: Bruce Ford Dunn RD350

Posted: Thu May 27, 2021 12:09 am
by Weldherup
steve-e wrote: Wed May 26, 2021 11:59 am When you have photos send them to steve@steveenglish.com and I'll add them here.
Til there are photos in my experience you won't get much response.
If you have an email address or phone numner you will get a better response as well.

I'm quite sure that with photos and some contact details you will get quite some response as the Fsra Pre injection and 350 class is on a roll at the moment.

Thanks Steve

Re: Bruce Ford Dunn RD350

Posted: Fri Jun 04, 2021 12:52 am
by joeheys123
how much i love350 ring joe heys 01204520726 cheers

Re: Bruce Ford Dunn RD350

Posted: Thu Jun 10, 2021 12:40 pm
by bruce ford-dunn
Hello Kyle.



as far as i remember i built that bike in 1981.If you have still got it could you email me please on bgfdunn@gmail.com.
regards bruce

Re: Bruce Ford Dunn RD350

Posted: Fri Jul 16, 2021 10:49 am
by mervnoble
bruce ford-dunn wrote: Thu Jun 10, 2021 12:40 pm Hello Kyle.



as far as i remember i built that bike in 1981.If you have still got it could you email me please on bgfdunn@gmail.com.
regards bruce
Bruce did you build this for my brother Steve?

Re: Bruce Ford Dunn RD350

Posted: Fri Jul 16, 2021 10:50 am
by mervnoble
Weldherup wrote: Thu May 27, 2021 12:08 am Got her pulled out. She’s not 100% finished but will be soon enough. It’s my mates bike. He’s moved onto another project and so this one may be available for sale. It needs a fairing and new shocks on the front and the rear serviced. It needs tyres and only has one set of wheels. There are no spares. She has a few war wounds here and there but it’s a nice bike over all. It’s a really nice well thought out little chassis. It’s very unique design. I’m not sure if the rd350 ypvs will be enough to be competitive but it maybe depends on your ability to tune it. It’s the same engine as a banshee and some of the lads that raced those had them motoring. The chassis is an 87 I think and the motor is a 86. There seems to have been some modifications in 2013 by CG I think. The chassis came from Steve Abbot before me and the motor came from a bike I bought a few years back as a donor.
I think that was first owned by my brother Steve

Re: Bruce Ford Dunn RD350

Posted: Fri Jul 16, 2021 10:51 am
by mervnoble
Weldherup wrote: Wed May 26, 2021 10:38 am I’ve a wee Bruce Ford Dunn chassis with an RD350 in it. The engine is freshly rebuilt and not even run in. It had bearings rods pistons and it’s got an electronic ignition. It’s got nice expansion boxes. It’s got new master cylinders, fuel pump. The shocks on the front are tired. Rear shock is fine. It’s running AP twin pots all round. It’s been started a few times and that’s all. Just gauging interest. The bodywork is shabby. It’s got an Ireson faring but it’s too heavy. No idea what it’s worth with this engine. I’ve no photos of it in its current trim. It’s at the back of the garage and so I won’t have any photos for a week at least. Any interest?
What price is it please?

Re: Bruce Ford Dunn RD350

Posted: Thu Jul 22, 2021 9:14 am
by rpmsi
Hi buddy is this still for sale if so cud u let me know rpmperformance128@gmail.com

Re: Bruce Ford Dunn RD350

Posted: Thu Sep 02, 2021 7:36 pm
by vaporblast
Is the old fairing still kicking around? See my post.

Re: Bruce Ford Dunn RD350

Posted: Wed Oct 06, 2021 2:57 pm
by bona eric (boul)
Bonjour le side est toujours a vendre ? voici mon mail pour communiquer boul.syde@gmail.com

Re: Bruce Ford Dunn RD350

Posted: Fri Oct 08, 2021 10:40 am
by Weldherup
Sorry for late reply, the bike is still here. I started making the gear change linkage but didn’t finished it. It owes over 6k in parts. It’s a wee bike I wanted to get finished and race but I’m struggling badly with my back so I will sell it as is.

Re: Bruce Ford Dunn RD350

Posted: Fri Oct 08, 2021 10:41 am
by Weldherup
image.jpg
image.jpg (2.34 MiB) Viewed 8735 times

Re: Bruce Ford Dunn RD350

Posted: Sat Oct 09, 2021 6:59 am
by bona eric (boul)
OUI A QUEL PRIX COMME IL SE TROUVE ACTUELLEMENT
BONNE JOURNEE A VOUS